Відео

270 for all of this seems like a steal, im 100% getting this when i get my bike in a couple weeks

For the OCD types, you can install the clutch lever without loosening up the clamp. You just need to work on the screws while looking down, and some precision tools.

Very nice setup but I can not use this because there is no light for the license plate.

@TSTindustries Someone else commented this question, should you keep the oem washer on the front right mount bolt or not? In the first install viseo you posted they keep the washer, while in this video he does not use it. This seems very important so any info would be appreciated.

Awesome review - thank you so much for sharing!

There is no base to place the colored ring on!

Why did my bar ends not come with the silver base component to fit my custom colored ring?

No idea how to install this with the color adonized ring set. They seem to go flush with the throttle and prevent me from turning it.

How did you remove the bolts holding the oem clip ons in place? Is there a special tool or something? I can't figure out what the bolt is let alone what tool would be needed for them

So will the bike run fine with a full exhaust without a tune ? Seems as though it gets a reasonable performance gain with just the full exhaust and the differences the tune makes is negligible but is it necessary to keep the a/f mix correct ?

Hola buenas podrías mandar ese tubo mas grueso a Islas Canarias para una MSX de 2020 ?

This is my next bike im going to get, would love the tail light with the fender eliminator

If by any chance I installed the way you show in the video, and everything work’s fine, when the motorcycle is off but when you turn it on the lights stop working just blinks ones. What may be wrong..?

Do you guys still have those exact pod turn signals ?

Also to add to my comment. Paid for the fastest shipping possible. (2 days). But took the company almost 4 days to even pack my order. Meanwhile I ordered an exhaust with free shipping from another company. And that is expected to get here before the TST product is. Both shipped by USPS. Definitely do not purchase fast shipping as it is a rip off as well as paying $200+ for nuts and bolts.

Nice!!👍

Nice dyno but why have you put this on the Dyno with only a few 100 miles on the clock surely it should be fully run in first before you rev the nuts out of it!!🤔🤷🏼‍♂️😬 Love this new MT09 tho!!👌🏻👍🏻

Yesss! I needed this video. Can't wait for the performance upgrade videos with different exhaust 🤩

So ....... what were the results?? What extra power did you get over the stock 74hp??

Will we see any tst parts coming out for the cfmoto 800nk? I'm interested in a fender eliminator low pro front turn signals and integrated taillight for mine

Cool video

Need TST to hurry with the eliminator lol cant stand mine already. Just ordered a replacement clutch lever since I snapped with the leaf blower by accident lol. Any thing you guys come out for this new model I'm dying to get already as I've already done with my other bikes. Keep at it!!!

Can I go ahead and install this first while still using the factory lights until i change them? That way it's done for when I change the lights later.

complete waste of time

I have been working on and restoring motorcycles for 40 years as a hobby and can tell that you are an exceptional mechanic and do excellent work.

I'm saving for me one

Does this come with the license plate bracket or do you have to purchase the fender eliminator as well???

So the gsx-8s have the same cross-plane build like a mt-07? Except that the suzuki have a bit more power.

Any levers available yet? Do you have options for long levers?

Just finished installing your tst integrated taillight...also got you license plate bracket and light....I watched your video a few times and was nervous about the wiring ..tip sendir plate and razor hacksaw parts.....I'm a machinist which helps, but not much of a mechanic.. Anyway..took around three hours...but it all works ,, brake light .blinkers and license plate light,, 👍 and it looks better then stock 👍 I have a 2019 Grom I bought a few weeks ago...if I can install it then anyone reading this can..😂 Main tools needed...beer...10 mm socket with extension...4,mm Allen wrench..razor to cut plastic..hacksaw...although could use just razor...Phillips screwdriver...1/8 inch drill for tip sensor bracket...and patience with the razor...follow the same cuts and it eventually cuts thru good.... I installed the license plate bracket backwards but it was easy to flip it when I noticed... For a little less then 200 dollars it's amazing compared to stock ...I bought the integrated lights...license holder and lights at the same time...and a relay ... Wish I could add pictures...

why would anyone want these type of frame sliders lol

these videos are great thanks for making them!

Easy installation my ASS Guy🤣🤣🤣🤣🤣🤣

Should I buy this or a gsx8s for my second bike coming from a z400. Ps. I like to go fast and live in flat Florida with not many curvy roads.

👍👍

Ive never geard of any dealership letting people do test rides! Is that a thing? Car dealerships do it but not motorcycle dealerships!

about $250 in total if anyone’s wondering. Overpriced but worth it if you don’t wanna go through hassle of looking for cheap alternatives. Just ordered mine.

It's easier to put the plate on the bracket first.

what wire do you tap into for the rear turn signals that have the running lights?

I don't know the mileage of this particular bike but my understanding is that an engine will generate more power when its loosened up a bit 🤔

This video didn't show how the low plate bracket mounted to the bike

Does the mt09 integrated tail light fit the mt10?

Rushing through the reassembly kinda stinks. That's where we screw up on our first try on this project.

I was charged extra for the load balancing resistor

Just threw away all my stuck parts. Built a track bike.

Does this also have the Cat installed as well? I have mine in route to me and I will be getting the tune you offer but dont know if I need to keep the cat in or not.

10600$??? in austria we have to pay 12200 €for normal version :(

Are you planning on making a tucked version. Would really prefer that tail tidy. All of my bikes have had tucked plates. Love your videos. And not sure but did you do a first ride on that bike?

I was looking into getting a different set of clipons myself and I know spacing issues were mentioned and hear a steering stop, what clip ons would you recommend or setup for custom clipons would be best, the size needed was 50mm correct?

If i get that tail light for my 2024 r3 Can i keep my buggy looking rear turn signals with my rear fender?